DEFENDER S E R I E S MULTIPAK DEF ergy int ell ige EN DER E S R I S E ener gy int ell ige TM nce DEF nce en MU Surg TM AK ner TIPConditio UL / Power SX-DS -154 LTI ector PA / Powe K EN DER S E R I E S e Prot r Con TM ditione r Me Protector SX-DS-1 Surg SX-DS-154 SX-DS-156 Quick Start 56
1 UNPACK If your unit was damaged during shipping, please call SurgeX Customer Service at 1-800-645-9721. 2 SHUT DOWN EQUIPMENT Turn off the equipment you are connecting to the MultiPak, and unplug the equipment’s power cord from the wall outlet. 3 CONNECT EQUIPMENT Connect the AC power cord of the equipment to be protected into one of the MultiPak’s convenient receptacles. - Make sure that the total amperage of all equipment connected to the MultiPak does not exceed the maximum branch circuit rating.
4 CONNECT MULTIPAK TO OUTLET Plug the MultiPak input power cord into a properly grounded and compatible branch circuit outlet. Please Note: Do not plug the MultiPak into a relocatable powertap. i. If the branch circuit outlet is correctly wired and the magnitude of the line voltage is acceptable, between 105 and 130 VRMS for 120V products, power will be connected to the outlets of the MultiPak and the Green “System On” LED will illuminate. Your equipment is now protected and installed correctly.
TECHNICAL SUPPORT Contact us at 1.800.645.9721 Visit surgex.com for user manual, product / warranty registration, and warranty information © 2013 SurgeX / Electronic Systems Protection, Inc.