User's Manual
40
// Carbon
Complete User Manual - English
Settings
CAST SCREEN
Your smartphone can send an audio/video signal to a remote screen (another smartphone, a
tablet, television, etc.) via Wi-Fi, effectively mirroring the first screen on both devices. Enable
Cast screen by tapping the icon. The telephone will start searching for nearby wireless
screens. Remember that for this to work the remote screen must be compatible with the
Miracast or DLNA protocols. Follow these steps to configure your Aquaris and duplicate your
device’s screen:
1. Switch on your compatible TV and enable cast screen mode (the process will vary
depending on the manufacturer
2. On your smartphone, go to Settings > Connected devices.
3. Scroll down the list and select Cast screen.
4. From the list, select the screen to which you want to send audio/video.
5. After a few seconds you will see your smartphone’s screen mirrored on the other
device in real time.
NFC
Your device is equipped with NFC (Near Field Communication)
technology, a short range communication system.
In addition to file transfers, it allows payments to be made via
contactless payment terminals and compatible bank applications.
This feature is only available once it has been enabled in Settings >
Connected devices > NFC to allow the exchange of data when the
phone touches another device.
For proper operation:
1. Check that NFC is enabled on the device.
2. Ensure the payment app you are going to use is correctly set
up by going to Settings > Apps and notications > Advanced >
Default apps >Tap and pay > Payment default.
3. Place the rear of the device close to the payment terminal
(no further away than 4cm) and keep it still until a tone is
heard. This indicates that the devices have been paired.
ANDROID BEAM
Allows app content to be shared when NFC is enabled.
NFC