Operation Manual

If your USB device is not properly detected, or your HP All-In-One device is connected
to the parallel port or the network, run the HP Device Manager:
1
Start YaST and select Hardware > Scanner. YaST loads the scanner database.
2
Start the HP Device Manager with Other > Run hp-setup and follow the on-screen
instructions. After having nished the HP Device Manager, the YaST scanner
module automatically restarts the auto detection.
3
Test it by choosing Other > Test.
4
Leave the conguration screen with OK.
12.3.2 Sharing a Scanner over the Network
openSUSE allows the sharing of a scanner over the network. To do so, congure your
scanner as follows:
1
Congure the scanner as described in Section 12.3, “Setting Up a Scanner” (page 189).
2
Choose Other > Scanning via Network.
3
Enter the hostnames of the clients (separated by a comma) that should be allowed
to use the scanner under Server Settings > Permitted Clients for saned and leave the
conguration dialog with OK.
12.3.3 Scanning over the Network
To use a scanner that is shared over the network, proceed as follows:
1
Start YaST and select Hardware > Scanner.
2
Open the network scanner conguration menu by Other > Scanning via Network.
3
Enter the hostname of the machine the scanner is connected to under Client Settings
> Servers Used for the net Metadriver
190 Reference