Operation Manual
Table Of Contents
- 1. Safety instructions
- 2. Application
- 3. Features
- 4. Technical data
- 5. Dimensional drawing
- 6. Determination of the installation point
- 7. Inlet and outlet sections
- 8. Sensor installation
- 9. Sensor signal outputs
- 10. Sensor display (option)
- 11. Service App S4C-FS
- 12. Calibration
- 13. Maintenance
- 14. Disposal or waste
- 15. Warranty
- 16. Appendix A - Analogue output
- 17. Appendix B - Modbus communication example
- 18. Appendix C - LRC and CRC calculation
15. Warranty
and packing costs.
Excluded from this warranty is:
• Damage caused by:
◦ Improper use and non-adherence to the instruction manual.
◦ Use of unsuitable accessories.
◦ External influences (e.g. damage caused by vibration, damage
during transportation, excess heat or moisture).
The warranty is cancelled:
• If the user opens the measurement instrument without a direct
request written in this instruction manual.
• If repairs or modifications are undertaken by third parties or
unauthorised persons.
• If the serial number has been changed, damaged or removed.
Other claims, especially those for damage occurring outside the
instrument are not included unless responsibility is legally binding.
Warranty repairs do not extend the period of warranty.
ATTENTION!
Batteries have a reduced warranty time of 12
month.
30 S401