Operation Manual
Table Of Contents
- 1. Safety instructions
- 2. Application
- 3. Features
- 4. Technical Data
- 5. Dimensional drawing
- 6. Installation
- 7. Configuration
- 8. Sensor signal outputs
- 9. Calibration
- 10. Maintenance
- 11. Disposal or waste
- 12. Warranty
- Appendix
6. Installation
6.2.2 Insertion angles
Please install the sensor only in
the recommended area like you
can see in the picture. A horizontal
installation is not permitted.
Please consider that the distance
to the horizontal level must be
>10°.
Installation in a vertical pipe is
possible, required the flow is from
bottom up and the sensor has at
least a 10 degree angle
(recommended is 20 degree).
ATTENTION: Do not install in
vertical pipes if the flow is from top
to down.
S430 15