Operation Manual
Table Of Contents
- 1. Safety instructions
- 2. Application
- 3. Features
- 4. Technical Data
- 5. Dimensional drawing
- 6. Installation
- 7. Configuration
- 8. Sensor signal outputs
- 9. Calibration
- 10. Maintenance
- 11. Disposal or waste
- 12. Warranty
- Appendix
Sensors that are within the reach of your Bluetooth signal while not
connected with other S4C-FS Apps are displayed on the home
screen.
Note: A red Wireless Connection icon is displayed behind a
connected sensor, which indicates that the sensor is
successfullyconnected but accessible in the read-only mode. In this
mode, you can only view the online parameter values and existing
settings.
4. Click the Scan QR Code button, and then scan the QR code
provided on the calibration certification.
A green Wireless Connection icon is displayed indicating that the
sensor is accessible in the editable mode.
Note: Only through scanning the QR code can you edit system
settings and perform calibrations.
5. Click the System icon.
On the System screen that appears, click Calibration and follow
the onscreen instructions to perform the zero flow calibration.
20 S430