Operation Manual
Table Of Contents
- 1. Safety instructions
- 2. Application
- 3. Features
- 4. Technical Data
- 5. Dimensional drawing
- 6. Installation
- 7. Configuration
- 8. Sensor signal outputs
- 9. Calibration
- 10. Maintenance
- 11. Disposal or waste
- 12. Warranty
- Appendix
7. Configuration
Icons are shown in the status bar indicating status or warnings for the
sensor in service. The following table provides descriptions for these
icons.
Icon Description
Calibration expired
Temperature over operating range
Flows over measuring range
Pressure over operating range
Pressure sensor damaged
Temperature sensor damaged
Flow direction
7.3.3 Configuration instructions
1. Press the Enter key (>3s).
2. Enter the unlock code:12
using the Up and Down keys,
and then enter Enter key.
3. Use the Up and Down keys
to choose the parameter that
you want to change.
4. Use the Up and Down keys
to select desired entry box or
adjust the values.
5. Press the Enter key to
confirm the changes.
S430 27