Operation Manual
Table Of Contents
- 1. Safety instructions
- 2. Application
- 3. Features
- 4. Technical Data
- 5. Dimensional drawing
- 6. Installation
- 7. Configuration
- 8. Sensor signal outputs
- 9. Calibration
- 10. Maintenance
- 11. Disposal or waste
- 12. Warranty
- Appendix
8. Sensor signal outputs
8.3 Pulse Connection Diagram
Using the isolated pulse switch (Connector B Pin 4 and 5)
Variant 1:
Variant 2:
8.4 Modbus output
Mode : RTU
Baud rate : 19200
Device address : 1
Framing / parity / stop bit : 8, E, 1
Response time : 1 second
Response delay : 0 ms
Inter-frame spacing : 7 char
Remarks
• Modbus communication settings can be changed by the service
software.
30 S430