Operation Manual
Table Of Contents
- 1 Safety instructions
- 2 Registered trademarks
- 3 RF exposure information and statement
- 4 Application
- 5 Features
- 6 Technical data
- 7 Dimensional drawing
- 8 Determining the installation point
- 9 Installing the sensor
- 10 Sensor signal outputs
- 11 Service App S4C-FS
- 12 Calibration
- 13 Maintenance
- 14 Disposal or waste
- 15 Appendix A - Modbus communication example
- 空白页面
10 Sensor signal outputs
In case that the flow rate is too high and the S402 cannot output pulses
with the default settings (one pulse per one consumption unit), use our
mobile service app S4C-FS to set the pulse output to 1 pulse per 10
consumption units or 1 pulse per 100 consumption units. For example,
when configured with 1 pulse per 10 m
3
, the sensor will send one pulse
each 10 m
3
.
Example (1 pulse per 10 m
3
):
Volumetric flow
[m
3
/s]
Volumetric flow
[m
3
/h]
Pulse length
[ms]
Max. pulse
output per hour
≦ 3 ≦ 10800 120 1080
> 3 > 10800 60 2880
> 6 > 21600 30 3960
24 S402