Operation Manual
Table Of Contents
- 1 Safety instructions
- 2 Registered trademarks
- 3 RF exposure information and statement
- 4 Application
- 5 Features
- 6 Technical data
- 7 Dimensional drawing
- 8 Determining the installation point
- 9 Installing the sensor
- 10 Sensor signal outputs
- 11 Service App S4C-FS
- 12 Calibration
- 13 Maintenance
- 14 Disposal or waste
- 15 Appendix A - Modbus communication example
- 空白页面
12 Calibration
12 Calibration
The sensor is calibrated ex work. The exact calibration date is printed
on the certificate which is supplied together with the sensor. The
accuracy of the sensor is regulated by the onsite conditions, and
parameters like oil, high humidity or other impurities can affect the
calibration and furthermore the accuracy. However we recommend to
This ensures that only authorized users can access the sensor settings.
calibrate the instrument at least once per year. The calibration is
excluded from the instruments warranty. For this please contact the
manufacturer.
13 Maintenance
To clean the sensor it is recommended to use distilled water or isopropyl
alcohol only.
ATTENTION!
Do not touch the surface of the sensor plate.
Avoid mechanical impact on the sensor (e.g with a
sponge or a brush).
If the contamination cannot be removed the sensor must be inspected
and maintained by the manufacturer.
14 Disposal or waste
Electronic devices are recyclable material and do not
belong in the household waste.
The sensor, the accessories and its packings must be
disposed according to your local statutory requirements.
The dispose can also be carried by the manufacturer of the
product, for this please contact the manufacturer.
S402 29