User's Manual
Table Of Contents
- 1. GENERAL INFORMATION
- 1.1. CHECKLIST
- 1.2. suunto t6 features
- 1.3. CARE AND MAINTENANCE
- 1.4. WATER RESISTANCE
- 1.5. REPLACING THE BATTERY
- 1.6. replacing the battery of the transmitter belt
- 1.7. heart rate transmitter belt
- 1.7.1. Activating the heart rate transmitter belt
- 1.7.2. Warnings
- 1.8. wireless speed and distance sensors
- 1.8.1. Activating the wireless speed and distance sensor
- 2. HOW TO USE YOUR SUUNTO t6
- 2.1. DISPLAY AND BUTTONS
- 2.1.1. Mode indicator
- 2.1.2. Battery level indicator
- 2.1.3. Alarm symbols
- 2.1.4. Key Lock
- 2.2. MENUS
- 2.2.1. Basic menu structure
- 2.2.2. Press and long press
- 2.2.3. Navigating in the menus
- 3. MODES
- 3.1. GENERAL INFORMATION
- 3.2. time mode
- 3.2.1. Main display
- 3.2.2. Alarm
- 3.2.3. Time
- 3.2.4. Date
- 3.2.5. General
- 3.2.6. Units
- 3.3. alti/baro mode
- 3.3.1. Use (Alti/Baro)
- 3.3.2. Alti use
- 3.3.3. Baro use
- 3.3.4. Reference altitude and barometric pressure
- 3.3.5. Memory
- 3.4. training
- 3.4.1. Stopwatch
- 3.4.2. Connect
- 3.4.3. Logbook
- 3.4.4. HR limits
- 3.4.5. Timers
- 3.4.6. Refer
- 3.4.7. History
- 3.4.8. Pair
- 3.4.9. Use (Alti/Baro)
- 3.5. SPD/DST mode
- 3.5.1. Main display
- 3.5.2. Connect
- 3.5.3. Autolap
- 3.5.4. Distance intervals
- 3.5.5. Speed limits
- 3.5.6. Calibrating wireless speed and distance sensor
- 3.5.7. pair
- 4. Using suunto t6 in training
- 4.1. Using HR and speed limits in training
- 4.2. making the most out of your training
- 5. suunto training MANAGER
- 5.1. System requirements
- 5.2. Installation
- 5.2.1. Installing Suunto Training Manager
- 5.2.2. Installing USB drivers for Suunto sport instruments
- 5.3. Suunto Training Manager features-ULLA
- 5.4. Uninstalling USB drivers for Suunto sport instruments
- 6. SUUntosports.com
- 6.1. GETTING STARTED
- 6.2. SECTIONS
- 6.3. My Suunto
- 6.4. Communities
- 6.5. Sport Forums
- 7. technical specifications
- 8. disclaimers
- 8.1. user’s responsibility
- 8.2. copyright, trademark and patent notice
- 8.3. ce
- 8.4. limits of liability and iso 9001 compliance
- 8.5. after sales service
- 8.6. disclaimer
25
Setting the temperature unit
The Temp setting defines the unit in which the
temperature is displayed. The options are:
• °C: Celsius
• °F: Fahrenheit
To change the temperature unit:
1. In the Time menu, scroll to Units and press ENTER.
2. Scroll to Temp and press ENTER.
3. Select the desired temperature unit with UP/DOWN
and press ENTER.
Setting the barometric pressure unit
The Pres setting defines the unit in which the barometric
pressure is displayed. The possible formats are:
• hPa: hectopascal (i.e. 1100 hPa)
• inHg: inches of mercury (i.e. 32.50 InHg).
To change the barometric pressure unit:
1. In the Time menu, scroll to Units and press ENTER.
2. Scroll to Pres and press ENTER.
3. Select the desired pressure unit with UP/DOWN and
press ENTER.