Operation Manual

9.2.2 Setting reference values
To set the sea level pressure and altitude reference values:
1. Keep [Next] pressed to enter the options menu.
2. Scroll to ALTI-BARO with [Light Lock] and enter with [Next].
3. Scroll to Reference with [Light Lock] and enter with [Next].
4. The following setting options are available:
●
FusedAlti: GPS is switched on and the device starts calculating altitude
based on FusedAlti. For more information, see Section 9.6
FusedAlti
TM
on page 60.
●
Manual altitude: Set your altitude manually.
●
Sea level pressure: Set the sea level pressure reference value manually.
5. Set the reference value using [Start Stop] and [Light Lock]. Accept the setting
with [Next].
55
en