Owner's Manual

Scroll with [Next] through summary views, until you reach the distance
summary. Adjust the distance shown on the display to the actual distance
you ran with [Start Stop] and [Light Lock]. Confirm with [Next].
7. Confirm the POD calibration by pressing [Start Stop]. Your Foot POD has
now been calibrated.
NOTE: If the Foot POD connection was unstable during the calibration exercise,
you might not be able to adjust the distance in the distance summary. Make sure
that Foot POD is attached properly according to instructions and try again.
To calibrate Suunto Bike POD, set the bike tire circumference in Movescount.
Movescount calculates a calibration factor. The default calibration factor is 1.0,
which stands for a 26” cross-country bike tire.
14.2 Bike power POD slope calibration
Suunto Ambit2 S automatically calibrates your power POD when it finds the
POD. You can also calibrate the power POD manually at any time during the
exercise.
To manually calibrate a power POD:
1. While you are in a sport mode, keep [Next] pressed to access the options
menu.
2. Stop pedaling and lift your feet off the pedals.
3. Scroll to CALIBRATE POWER POD with [Light Lock] and select with [Next].
104