Owner's Manual

Suunto Ambit2 S starts calibrating the POD and indicates if the calibration

succeeded or failed. The bottom row of the display shows the current frequency

used with the power POD. The previous frequency is shown in parentheses.

If your power POD has an auto zero feature, you can turn this on/off through

your Suunto Ambit2 S.

To set auto zero on/off:

1. After the calibration is completed, press [Start Stop].

2. Set auto zero On/Off with [Light Lock] and accept with [Next].

3. Wait until the setting is completed.

4. Repeat procedure if setting fails or power POD is lost.

105