Owner's Manual

TIP: You can create POIs in Movescount by selecting a location on a map or
inserting the coordinates. POIs in your Suunto Ambit2 S and in Movescount are
always synchronized when you connect the device to Movescount.
8.3.2 Adding point of interest (POI) coordinates manually
You can save a location other than your current location as a POI by entering
the coordinates manually.
To manually add the coordinates of a location:
1. Press [Start Stop] to enter the start menu.
2. Scroll to NAVIGATION using [Start Stop] and select with [Next].
3. Scroll to POIs (Points of interest) using [Light Lock] and select with [Next].
The device shows the number of POIs currently stored in the device and
the amount of space available for new POIs.
4. Scroll to Define location using [Light Lock] and select with [Next]. The
device shows the coordinates of the location where the last GPS fix was
taken.
5. Edit the latitude values with [Start Stop] and [Light Lock]. Accept the values
with [Next].
6. Edit the longitude values with [Start Stop] and [Light Lock]. Accept the
values with [Next].
7. Select a suitable POI type for the location. Scroll through the POI types with
[Start Stop] or [Light Lock]. Select a POI type with [Next].
8. Select a suitable name for the location. Scroll through the name options
with [Start Stop] or [Light Lock]. Select a name with [Next].
9. Press [Start Stop] to save the POI.
34