Owner's Manual

calibration was successful. The text Level is blinking on the display when

the device is not leveled.

2. The tilt calibration starts automatically after a successful level calibration.

Keep the device tilted at 90º until you hear the confirmation sound and the

text Calibration successful is displayed.

If the calibration does not succeed, the text Calibration failed is displayed.

To retry the calibration, press [Start Stop].

9.2 Setting declination value

To ensure correct compass readings, set an accurate declination value.

Paper maps point to true north. Compasses, however, point to magnetic north

– a region above the Earth where the Earth’s magnetic fields pull. Because

magnetic North and true North are not at the same location, you must set the

declination on your compass. The angle in between magnetic and true north

is your declination.

The declination value appears on most maps. The location of magnetic north

changes yearly, so the most accurate and up-to-date declination value can be

obtained from the internet (for example www.magnetic-declination.com).