Owner's Manual

NOTE: Resetting GPS resets GPS data, compass calibration values, alti/baro

graphs and recovery time. However, your recorded logs will not be removed.

NOTE: Service menu content is subject to change without notice during updates.

Sleep mode

You can put your Suunto Ambit2 S into sleep mode, if you are not using it for

a while to save battery duration.

To put the device into sleep mode:

1. In the service menu, scroll to ACTION with [Light Lock] and enter with [Next].

2. Press [Next] to select Sleep mode.

3. Press [Start Stop] to confirm, or press [Light Lock] to cancel.

To activate the device from sleep mode, press any button.

NOTE: The device switches to power saving mode when it is static for 30

minutes. The device re-activates when moved.

Resetting GPS

In case GPS is not working properly, you can reset GPS data in the service menu.

To reset GPS:

1. In the service menu, scroll to ACTION with [Light Lock] and enter with [Next].

2. Press [Light Lock] to scroll to GPS reset and enter with [Next].

3. Press [Start Stop] to confirm GPS reset, or press [Light Lock] to cancel.