User Guide Instruction Manual

Figure 5.6. Startup II. Battery power indicator.
At this time, perform your pre-checks, and ensure that:
•
the instrument operates in the correct mode and provides a complete display
(AIR/NITROX/GAUGE mode)
•
the low battery indicator is not on.
•
the altitude and personal adjustment settings are correct.
•
the instrument displays correct units of measurement (Metric/Imperial).
•
the instrument displays the correct temperature and depth (0.0 m/0 ft).
•
the alarm beeps
•
the buzzer beeps
•
you have enough air for your planned dive. You should also check the pressure
reading against your back-up pressure gauge
44