User Manual

3 DIVING WITH SUUNTO ELEMENTUM AQUA

3.1 Before diving

Before diving, check that:

●

time and date are correctly set (if you have been traveling between different

time zones).

●

the battery level is not too low (see Section 4.1 Battery replacement).

●

the device displays the correct units of measurement (metric/imperial).

3.2 Starting a dive

Suunto Elementum Aqua switches into DIVE mode when it is in contact with

water and reaches depth more than 0.6 m. The symbol on the display indicates

water contact. After you reach depth more than 1.2 m, Suunto Elementum

Aqua automatically starts recording your dive time.