User guide

1. In TIME mode, rotate [A] downwards to enter MEMORY. The latest altitude

log is shown first.

2. Rotate [A] downwards to browse the logs from latest to oldest. Rotate [A]

upwards to browse the logs from oldest to latest.

3. Press [A] to switch between the first and second view of the log.

4. Press [B] or [C] to exit MEMORY.

The information on your altitude logs is stored in MEMORY. Each log has its own

memory slot that is shown as a segment on the outer rim on the display. The

log information is divided into two views. In the first view (picture 2), the

following information is shown:

●

maximum altitude (first row)

●

start time (second row)

●

start date (bottom row)

The second view (picture 3 and 4) shows the following information:

●

cumulative descent (first row)

●

cumulative ascent (second row)

●

duration (bottom row)

NOTE: MEMORY stores up to 8 logs. After MEMORY is full, each new log replaces

the oldest log.