User's Manual

•
You change a setting value
•
You set the altitude reference value
•
You start or stop the log recorder
•
You mark an altitude point while you are recording logs
•
You start or stop the stopwatch
•
The device switches between the ALTIMETER and BAROMETER
profile when you are
using the AUTOMATIC profile.
To turn tone guides on or o:
1. In GENERAL, select TONE GUIDES.
2. Switch the tone guides on or o with [+] and [- Light] .
5.2.3. Backlight
In BACKLIGHT you switch between two dierent light features: any button and light button.
To set the backlight to normal or night use:
1. In GENERAL, select BACKLIGHT.
2. Switch the backlight between LIGHT BUTTON and ANY BUTTON with [+] and [- Light] .
When LIGHT BUTTON has been selected, you can activate the backlight with [- Light] . The
backlight is turned
o automatically after 5 seconds. If you want to see the backlight when
you are in the MENU, you need to activate it in the TIME, ALTI & BARO or COMPASS mode
before entering the MENU. The backlight will then be activated until you exit MENU.
When ANY BUTTON has been selected, the backlight is activated every time you push a
button.
5.2.4. Language
In LANGUAGE you choose the language of your Suunto Core user interface (English, German,
French or Spanish).
To choose a language:
1. In GENERAL, select LANGUAGE.
2. Select a language from the list with [+] and [- Light] .
5.2.5. Activating button lock
You can activate and deactivate the button lock by keeping [-Light] pressed down. When the
button lock is activated, it is indicated with a lock symbol
.
NOTE: You can change views and use the backlight when the button lock is activated.
Suunto Core
10