User's Manual
Table Of Contents
- 1. SAFETY
- 2. Welcome
- 3. Introduction
- 4. Getting started
- 5. General settings
- 6. Using time mode
- 7. Using ALTI & BARO mode
- 8. Using compass mode
- 9. Using memory
- 10. Care and support
- 11. Specifications
•
Empty: no additional view
NOTE: If you are wearing your Suunto Core on your wrist, you will need to take it o in
order to get an accurate temperature reading because your body temperature will aect the
initial reading.
A 7-day log of changes in sea level air pressure can be viewed in ALTI-BARO memory in
MENU (see 9.1. Alti-baro memory).
You’re still hiking and you’re getting tired. You decide to take a nap and you set up your tent.
Since your altitude will stay the same for a while, you activate the BarometerBarometer
profile. When you wake up, you will be able to check changes in sea level air pressure with an
eye on the weather.
7.6.1. Recording logs
When you are recording logs in the ALTIMETER
profile, you can switch to the BAROMETER
profile when you for example take a break during a hike.
The log recorder will continue recording the log, but it will not record changes in air pressure.
When the barometer profile is activated, the device assumes you are not moving in altitude,
and it will therefore not record any altitude changes. The altitude log will therefore be flat
during this period. For information on using the log recorder, see 7.5.2. Recording logs.
You can start, stop and reset the altitude measurement while in the BAROMETER
profile.
You are recording your altitude changes during a hike and decide to take a longer break. You
switch to the BarometerBarometer
profile. Since the altitude recording continues but no
altitude changes are occurring, you go to the log recorder view in the BarometerBarometer
profile and stop the altitude recording.
7.7. Using automatic profile
The AUTOMATIC profile switches between the ALTIMETER and BAROMETER profiles
according to your movements. When the AUTOMATIC profile is activated, [auto icon] appears
on the upper right part of the display. Depending on which profile is activated, you can access
the ALTIMETER or BAROMETER profile views with [View] .
When the device is moving 5 meters in altitude within 3 minutes, the ALTIMETER profile is
activated. When the device does not move in altitude for 12 minutes, the BAROMETER profile
is activated.
NOTE: The AUTOMATIC profile should not be activated all the time. Some activities
require the BAROMETER profile to be constantly activated even though you might be moving
(e.g. surfing). In other words, in certain situations you need to choose a suitable profile
manually.
Suunto Core
19