User's Manual

9. Using memory
9.1. Alti-baro memory
ALTI-BARO automatically records changes in altitude or sea level air pressure for the last 7
days. Information will be stored depending on which profile is active at the moment of the
recording. Records are stored every 30 minutes.
To view the records of the last 7 days:
1. In MEMORY, select ALTI-BARO.
2. Use [+] and [- Light] to browse through the records.
You are camping in the mountains. You want to predict tomorrow’s weather, so you switch
your to the BarometerBarometer profile for the night. In the morning you check the alti-
baroalti-baro memory and note that the air pressure remained stable for the whole night.
Hopefully this will continue during the day.
9.2. Viewing and locking logs
Logs recorded by the log recorder in the ALTIMETER, BAROMETER or DEPTH METER profile
are stored in LOGBOOK. You can store up to 10 logs. A new log always replaces the oldest
log in LOGBOOK. To save logs, you can lock them.
is shown when a log is locked.You can
only lock up to 9 logs.
When entering LOGBOOK, you are shown the number of unlocked logs. You can then choose
to either view or lock logs.
When you view logs, you are first shown a list of available logs complete with times and dates.
You can scroll and then enter each log to view its summary information and details.
9.2.1. Viewing logs
When viewing log summaries, you are shown
•
A summary graph, time of recording and highest point
•
Total descent, duration of descent, average descent speed
•
Total ascent, duration of ascent and average ascent speed
•
Altimeter split time (total log duration from start) and lap times (duration since last lap time)
When viewing log details, you are shown:
•
A graph of the changes in altitude
•
Time of recording
•
Altitude/depth at the time of recording
To view the logs:
1. In MEMORY, select LOGBOOK.
2. Choose a log from the list.
3. Select VIEW.
4. Switch between log summaries with [+] and [- Light] .
5. View log details with [Mode] .
Suunto Core
24