User's Manual
Table Of Contents
- 1. SAFETY
- 2. Welcome
- 3. Introduction
- 4. Getting started
- 5. General settings
- 6. Using time mode
- 7. Using ALTI & BARO mode
- 8. Using compass mode
- 9. Using memory
- 10. Care and support
- 11. Specifications
20
Menu
In MENU you can change values, change the general settings and units, or view logs stored
in the logbook. To enter MENU, keep the middle right [Mode] button pressed while in the
TIME, ALTI & BARO or COMPASS mode. The segments in the outer part of the display
indicate your transition time. Exit MENU by pressing the upper left [Start Stop] button.
Whenever an exit option is available in MENU, this is indicated with an “X” on the screen next
to the [Start Stop] button. Get familiar with entering and exiting MENU!
Backlight
You can activate the backlight in any mode by pressing the lower right [- Light] button. The
backlight turns o automatically after 5 seconds. If you want to see the backlight when you
are in MENU, you need to activate it in the TIME, ALTI & BARO or COMPASS mode before
entering MENU. The backlight will return to normal when you return to a mode.
Button lock
You can activate and deactivate the button lock by keeping the lower right [-Light] button
pressed.
NOTE: You can change views and use the backlight when the button lock is activated.
Changing values
To change a setting, you have to be in MENU. To enter MENU, keep the right middle [Mode]
button pressed down in the TIME, ALTI&BARO or COMPASS mode. Any changes you make
in MENU take eect immediately. For example, if you enter TIME-DATE in MENU and change
the time from 12:30 to 11:30 and exit. The time will be set to 11:30.
Suunto Core
8