SUUNTO ZOOP NOVO USER GUIDE
1 Safety ................................................................................................ 5 2 Getting started ............................................................................... 11 2.1 Display states and views ......................................................... 11 2.2 Icons ........................................................................................ 11 2.3 Set up ......................................................................................
.13 Dive planning mode ............................................................. 38 3.14 Dive time alarm .................................................................... 39 3.15 Error state (algorithm lock) ................................................. 40 3.16 Personal and altitude adjustments ...................................... 41 3.17 Power save mode ................................................................. 43 3.18 Safety stops and deepstops ........................................
5.4 Patent notice .......................................................................... 5.5 Warranty ................................................................................. 5.6 Copyright ................................................................................ 5.7 Terms ...................................................................................... Index ..................................................................................................
1 SAFETY Types of safety precautions WARNING: - is used in connection with a procedure or situation that may result in serious injury or death. CAUTION: - is used in connection with a procedure or situation that will result in damage to the product. NOTE: - is used to emphasize important information. TIP: - is used for extra tips on how to utilize the features and functions of the device. Before you dive Make sure that you fully understand the use, displays and limitations of your dive instruments.
Safety precautions WARNING: ONLY TRAINED DIVERS SHOULD USE A DIVE COMPUTER! Insufficient training for any kind of diving, including freediving, may cause a diver to commit errors, such as incorrect use of gas mixtures or improper decompression, that may lead to serious injury or death. WARNING: You must read the printed quick guide and online user guide for your dive computer. Failure to do so may lead to improper use, serious injury or death.
WARNING: If you have a pacemaker, consult a doctor before using this device. The inductive frequency used by the device may interfere with pacemakers. WARNING: Allergic reactions or skin irritations may occur when product is in contact with skin, even though our products comply with industry standards. In such event, stop use immediately and consult a doctor. WARNING: Not for professional use! Suunto dive computers are intended for recreational use only.
WARNING: PERFORM PRE-CHECKS! Always check that your dive computer is functioning properly and has the correct settings before diving. Check that the display is working, the battery level is OK, tank pressure is correct, and so forth. WARNING: Check your dive computer regularly during a dive. If there is any apparent malfunction, abort the dive immediately and safely return to the surface.
WARNING: DO NOT DIVE WITH A GAS IF YOU HAVE NOT PERSONALLY VERIFIED ITS CONTENTS AND ENTERED THE ANALYZED VALUE INTO YOUR DIVE COMPUTER! Failure to verify tank contents and enter the appropriate gas values where applicable into your dive computer will result in incorrect dive planning information. WARNING: Using a dive planner software such as in Suunto DM5 is not a substitute for proper dive training. Diving with mixed gases has dangers that are not familiar to divers diving with air.
Emergency ascents In the unlikely event that the dive computer malfunctions during a dive, follow the emergency procedures provided by your certified dive training agency to immediately and safely ascend.
2 GETTING STARTED 2.1 Display states and views Suunto Zoop Novo has four main modes: TIME, DIVE, PLANNING and MEMORY. Change modes by pressing [MODE]. Unless DIVE mode is turned off, Suunto Zoop Novo automatically switches to DIVE mode if you are more than 1.2 m (4 ft) under water. 12:00 DIVE PLAN MEM 1.12 TH 12:00 1.12 TH Time and dive modes have different views in the bottom row which you can scroll through with [DOWN] and [UP]. 2.
1. 6. 2. 7. 3. 4. 8. 5.
Icon Description 5 Low battery 6 Active water contact 7 Diver attention symbol 8 Ascent rate 2.3 Set up To get the most out of your Suunto Zoop Novo, take some time to read this manual and familiarize yourself with the modes and settings. Make absolutely sure you have it set up as you want before getting into the water. To get started: 1. Wake up the device by keeping any button pressed until the display turns on. 2. Keep [DOWN] pressed to enter General Settings. 3. Set time. See 3.7.1 Time. 4.
3 FEATURES 3.1 Activation and pre-checks Unless the dive mode turned off, the dive mode activates automatically when you dive deeper than 1.2 m (4 ft). However, you should switch to dive mode before diving to check altitude and personal settings, battery condition and so on. Each time your Suunto Zoop Novo enters dive mode, a series of automatic checks are performed. All graphical display elements are turned ON, and the backlight and the beep are activated.
12:00 DIVE Air 1.12 TH 66.2 m Batttery OK PO AO 21 1.6 Between consecutive dives, the automatic checks also show current tissue saturation. 66.2 m PO AO 21 1.6 Before leaving on a dive trip, it is highly recommended that you switch to dive mode to make sure everything is functioning properly.
After the automatic checks, Suunto Zoop Novo enters surface mode. At this point, you should perform your manual checks before entering the water. Ensure that: 1. Suunto Zoop Novo is in the correct mode and provides complete displays. 2. Altitude setting is correct. 3. Personal setting is correct. 4. Deepstops are set correctly. 5. Unit system is correct. 6. Correct temperature and depth are shown. 7. The alarm beeps. 3.1.1 Battery indicators Temperature or internal oxidation can affect the battery voltage.
If the low battery icon appears in surface mode, or if the display looks faded, the battery may be too low. Battery replacement is recommended. NOTE: For safety reasons, the backlight and buzzer (sound) cannot be activated when the low battery warning is displayed. 3.2 Alarms, warnings and notifications Suunto Zoop Novo has audible and visual alarms designed to let you know when important limits or presets are being reached.
Instructional beep Sound pattern Interpretation Ascending Start ascending Descending Start descending Suunto Zoop Novo displays information during the alarm breaks in order to save battery life. High priority alarms: 18 Alarm Explanation High priority alarm followed by 'Start ascending' beep, repeated for maximum three minutes PO2 value blinks PO2 value greater than the adjusted value. Current depth is too deep for the gas in use. You should immediately ascend or change to a lower O2% gas.
Alarm Explanation and an arrow points downwards. High priority alarm, repeated three times. SLOW blinks. Maximum ascent rate of 10 m/min (33 ft/min) exceeded. Slow down your ascent rate. Low priority alarms: Alarm type Alarm reason Low priority alarm followed by 'Start ascending' beep, sounded two times. ASC TIME blinks and an arrow points upwards. No-decompression dive becomes a decompression stop dive. Depth is below the decompression floor level. You should ascend to, or above, the floor.
Alarm type Alarm reason Low priority alarm followed by 'Start descending' beep, repeated for three minutes. An arrow points downwards. Mandatory safety stop violated. You should descend to complete the safety stop. Low priority alarm followed by two short beeps. DEEPSTOP and timer displayed. Deepstop depth reached. Make the mandatory deepstop for the duration shown by the timer. Low priority alarm, repeated twice. OLF% value blinks if PO2 value is greater than 0.5 bar.
Alarm type Alarm reason Low priority alarm, Defined dive time exceeded. repeated twice; dive time Acknowledge the alarm by pressing value blinks any button. Low priority alarm. Maximum depth value blinks. Defined depth reached (Free dive mode only). Acknowledge the alarm by pressing any button. Low priority alarm, Duration of surface time until next Surface time value blinks. dive (Free dive mode only). Acknowledge the alarm by pressing any button.
3.3 Apnea timer You can use the apnea timer for interval training when freediving. You can adjust the following settings: • Vent.: ventilation time; this is the starting duration of the time your breathing time. The time is increased by the increment time for each interval. • Incr: increment time; this is added to the ventilation time for each interval.
5. Adjust the number of intervals with [UP] or [DOWN] and confirm with [SELECT]. To use the apnea timer: 1. Press [SELECT] to start the first interval. The timer counts down the ventilation time. The countdown continues up to -0:30 seconds beyond the defined ventilation time. 2. Press [SELECT] to start the apnea cycle. You can start this at any time during the ventilation countdown. The apnea time is not defined in the watch. It is as long or short as you choose. 3.
18.3 25 21,5 20 When the maximum allowed ascent rate is exceeded, the lower segment of the bar starts to blink and the top segment stays solid. 14.8 35 21,5 20 Continuous ascent rate violations result in mandatory safety stops. See 3.18 Safety stops and deepstops . WARNING: DO NOT EXCEED THE MAXIMUM ASCENT RATE! Rapid ascents increase the risk of injury. You should always make the mandatory and recommended safety stops if you have exceeded the maximum recommended ascent rate.
3.5 Backlight To active the backlight in dive mode, press [MODE]. In other modes, keep [MODE] pressed until the backlight activates. You can define how long the backlight stays on when you activate it or turn the backlight off altogether. To set backlight duration: 1. While in time mode, keep [DOWN] pressed. 2. Press [DOWN] to scroll to BACKLIGHT and press [SELECT]. 3. Set duration or turn off with [DOWN] or [UP]. 4. Press [MODE] to save and exit to settings.
3.7.1 Time In the time settings, you can set the hours, minutes, seconds, and format (12 or 24-hour). To set time: 1. While in time mode, keep [DOWN] pressed. 2. Press [UP] to scroll to Time and press [SELECT]. 3. Set hours with [DOWN] or [UP] and confirm with [SELECT]. 4. Repeat for minutes and seconds. Set the format with [DOWN] or [UP] and confirm with [SELECT]. 5. Press [MODE] to exit. 3.7.2 Date The date and weekday are shown in the bottom row of time mode. Press [DOWN] to toggle between views.
3. Press [DOWN] to toggle between Metric and Imperial and confirm with [SELECT]. 4. Press [MODE] to exit. 3.7.4 Dual time Dual time allows you to keep track of the time in a second time zone. Dual time is shown in the bottom left of the time mode display by pressing [DOWN]. To set dual time: 1. While in time mode, keep [DOWN] pressed. 2. Press [UP] to scroll to Dual Time and press [SELECT]. 3. Set hours with [DOWN] or [UP] and confirm with [SELECT]. 4. Repeat for minutes. 5. Press [MODE] to exit. 3.7.
5. Repeat for minutes. 6. Press [MODE] to exit. 3.8 Depth alarm By default the depth alarm sounds at 30 m (100 ft). You can adjust the depth according to your personal preference or switch it off. To adjust the depth alarm: 1. While in a dive mode, keep [DOWN] pressed to enter settings. 2. Press [UP] to scroll to Depth Alarm and press [SELECT]. 3. Press [UP] to toggle the alarm on/off and confirm with [SELECT]. 4. Adjust depth with [DOWN] or [UP] and accept with [SELECT]. 5. Press [MODE] to exit.
3.10 Dive history Suunto Zoop Novo has a detailed logbook and dive history available in memory mode. The logbook contains a sophisticated dive profile for each recorded dive. The time between each data point saved in the log is based on the configurable sample rate (see 3.19 Sample rate). The dive history is a summary of all recorded dives. To access dive history: 1. Press [MODE] until you see MEM. 2. Switch between History and Logbookwith [DOWN] or [UP]. 3.
Free dive history shows the following: • the deepest and the longest dives of all free dives • the cumulative dive time in hours and minutes • the total number of dives The free dive history records a maximum of 999 dives and 99:59 diving hours. When these limits are reached, the counters are reset to zero. Logbook Each log has three pages: 1. Main page maximum depth date of dive type of dive (indicated by first letter of dive mode, e.g.
maximum depth surface time after previous dive average depth warnings OLF% (if applicable) 3. Dive profile graph • • • • • water temperature depth/time profile of the dive Press [UP] to scroll through the dive profile graph or keep [UP] pressed to auto-scroll. The dive profile graph shows point by point dive information such as depth, compass heading, decompression info, ceiling and ascent time. The End of Logs text is displayed between the oldest and most recent dive.
If the memory is full, when new dives are added, the oldest dives are deleted. The contents of the memory remain when the battery is changed (providing that the battery has been replaced according to the instructions). NOTE: Several repetitive dives are considered to belong to the same repetitive dive series if the no-fly time has not ended. 3.
4. Press [MODE] to exit. Each dive mode has its own settings which you need to adjust while in the given mode. To modify dive mode settings: 1. While in a given dive mode, keep [DOWN] pressed. 2. Press [DOWN] or [UP] to scroll through the settings. 3. Press [SELECT] to enter a setting. 4. Adjust the setting with [DOWN] or [Up] and confirm with [SELECT]. 5. Press [MODE] to exit. NOTE: Some settings cannot be changed until five (5) minutes have elapsed after the dive. 3.11.
Diving with nitrox allows you to increase bottom times or reduce the risk of decompression illness. However, when the gas mix is altered or depth increased, the oxygen partial pressure is generally increased. Suunto Zoop Novo provides you with information to adjust your dive and stay within safe limits. NITROX mode has the following settings • Nitrox (gas mixture) • Personal/altitude adjustment (see 3.16 Personal and altitude adjustments) • Depth alarm (see 3.8 Depth alarm) • Dive time alarm (see 3.
53.6 Mix1 Primary 4. Adjust the PO2 (oxygen partial pressure) value with [DOWN] or [UP] and accept with [SELECT]. 5. Adjust other settings as needed. 6. Press [MODE] to exit. NOTE: If the oxygen content of a mix is set to 22% or above, the setting value remains until changed. It does not automatically revert back to 21%. 3.11.3 Gauge mode With Gauge mode, you can use Suunto Zoop Novo as a bottom timer.
3'55 0'00 Bookmark 1 stored 0'10 3'55 Gauge mode has the following settings • Depth alarm (see 3.8 Depth alarm) • Dive time alarm (see 3.14 Dive time alarm) • Sample rate (see 3.19 Sample rate) Gauge mode is a bottom timer only and thus includes no decompression information or calculations. 3.11.4 Free mode With Free mode, Suunto Zoop Novo can be used as a freediving instrument. The dive time is indicated in minutes and seconds in the center of the display. The free dive starts at 1.
3.11.4.1 Depth notifications You can define up to five independent depth notifications for freediving, for example, to alert you to start free falling or mouth filling. Each notification has a defined depth and can be turned on or off. When you reach the notification depth, the backlight blinks and the low priority audible alarm sounds. To define depth notifications: 1. While in Free mode, keep [DOWN] pressed. 2. Press [SELECT] to enter the Depth Notify settings. 3.
3. Press [DOWN] or [UP] to toggle the timer on and confirm with [SELECT]. 4. Adjust the countdown duration with [DOWN] or [UP] and conform with [SELECT]. 5. Press [MODE] to exit. 3.12 Dive numbering If the Suunto Zoop Novo has not counted the no-fly time down to zero, then repetitive dives belong to the same dive series. Within each series, the dives are given numbers. The first dive of the series is DIVE 1, the second DIVE 2, and so on.
The dive plan takes into account: any calculated residual nitrogen dive history from the past four days To plan dives: 1. Press [MODE] until you see PLAN NODEC. 2. The display briefly shows your remaining desaturation time before continuing to the planning display. 3. Press [DOWN] or [UP] to scroll your upcoming dive depths. The depth moves in 3 m (10 ft) increments from 9 m – 45 m (30 ft – 150 ft). The no-decompression time limit for the selected depth is shown in the center of the display.
To set the dive time alarm: 1. While in a relevant dive mode, keep [DOWN] pressed. 2. Press [DOWN] or [UP] to scroll to ALARM TIME. 3. Press [UP] to toggle the alarm on and press [SELECT] to confirm. 4. Adjust the duration with [UP] or [DOWN] and accept with [SELECT]. 5. Press [MODE] to exit. 3.15 Error state (algorithm lock) Suunto Zoop Novo has warning indicators that alert you to react to certain situations that would significantly increase the risk of DCI.
In such a condition, you should descend back below the ceiling level to continue the decompression. If you fail to do so within three (3) minutes, Suunto Zoop Novo locks the algorithm calculation and displays ER instead, as shown below. Note that the ceiling value is no longer present. In this state, you significantly increase your risk of decompression sickness (DCS). Decompression information is not available for the next 48 hours after surfacing.
The three-step personal setting can be used to adjust the algorithm to fit your DCS susceptibility. Personal adjustment Explanation 0 Ideal conditions (default value). 1 Conservative. Some risk factors or conditions exist. 2 More conservative. Several risk factors or conditions exist. In addition to the personal setting, Suunto Zoop Novo can be adjusted for diving at different altitudes. This adjusts the decompression calculation according to the selected altitude adjustment.
3. Press [UP] to change the Personal adjustment and confirm with [SELECT]. 4. Press [UP] to change the Altitude adjustment and confirm with [SELECT]. 5. Press [MODE] to exit. WARNING: Traveling to a higher altitude can temporarily cause changes to the equilibrium of dissolved nitrogen in the body. It is recommended that you acclimatize to the new altitude by waiting at least three (3) hours before diving. 3.
NOTE: When deepstops are enabled, the length of mandatory safety stops is indicated in seconds. When the ascent rate exceeds 10 m (33 ft) per minute for more than five consecutive seconds, the microbubble build-up may be more than is allowed for in the decompression model. In this situation, Suunto Zoop Novo adds a mandatory safety stop to the dive. The time of this stop depends on the speed violation of the ascent rate. The STOP icon is shown in the display.
Wait at the ceiling until the mandatory safety stop warning disappears. WARNING: NEVER ASCEND ABOVE THE CEILING! You must not ascend above the ceiling during your decompression. In order to avoid doing so by accident, you should stay somewhat below the ceiling. Deepstops activate when you dive deeper than 20 m (65.6 ft). If the dive timer is on the screen when deepstop activates, the timer is replaced with deepstop.
Deepstop is on by default in Air and Nitrox modes. To turn deepstop off: 1. While in a dive mode, keep [DOWN] pressed. 2. Press [DOWN] to scroll to Deepstop and enter with [Select]. 3. Press [UP] to toggle on/off. 4. Press [MODE] to exit. 3.19 Sample rate The sample rate controls how often information from the dive is saved to the active log. The default sample rate is 20 seconds in air and nitrox modes, and 2 seconds in free dive mode. To change the sample rate: 1.
3.20 Software version You can check the software version and battery status of Suunto Zoop Novo under the general settings. 1. While in time mode, keep [DOWN] pressed. 2. Press [UP] to scroll to Version and press [SELECT]. 3. The software version is displayed along with the battery voltage. 3.21 Stopwatch The stopwatch can be used to measure elapsed and split times. To activate the stopwatch: 1.
You can also use the stopwatch while diving for various timing purposes. To activate the stopwatch in dive mode, keep [MODE] pressed. Start and stop the stopwatch by pressing [SELECT]. NOTE: If a deepstop activates while you are using the stopwatch, the timer field is not visible. 3.22 Surface and no-fly time Once back at the surface, Suunto Zoop Novo continues to provide post-dive safety information and alarms. If, after your dive, you need to wait until flying, the no-fly symbol displays in all modes.
No-fly time is always at least 12 hours and equals desaturation time when it is more than 12 hours. For desaturation times shorter than 70 minutes, the no-fly time is not displayed. If decompression is omitted during a dive so that Suunto Zoop Novo enters error state (see 3.15 Error state (algorithm lock)), the no-fly time is always 48 hours. If a dive is done in Gauge mode (bottom timer), the no-fly time is 48 hours.
A minimum surface interval of 12 hours would be required in order to be reasonably assured a diver will remain symptom free upon ascent to altitude in a commercial jetliner (altitude up to 2,400 m (8,000 ft)). • Divers who plan to make daily, multiple dives for several days, or make dives that require decompression stops, should take special precautions and wait for an extended interval beyond 12 hours before a flight.
values in Suunto SME. Since then research and development has been ongoing with the help of both external and internal experts. In the late 1990s, Suunto implemented Dr. Bruce Wienke's RGBM (Reduced Gradient Bubble Model) bubble model to work with the earlier M-value based model. The first commercial products with the feature were the iconic Suunto Vyper and Suunto Stinger.
are available for divers who dive constantly and are ready to accept greater personal risk. CAUTION: Always use the same personal and altitude adjustment settings for the actual dive and for the planning. Increasing the personal adjustment setting from the planned setting as well as increasing the altitude adjustment setting can lead to longer decompression times deeper and thus to larger required gas volume.
WARNING: SET THE CORRECT ALTITUDE SETTING! When diving at altitudes greater than 300 m (1000 ft), the altitude setting must be correctly selected in order for the computer to calculate the decompression status. The dive computer is not intended for use at altitudes greater than 3000 m (10000 ft). Failure to select the correct altitude setting or diving above the maximum altitude limit will result in erroneous dive and planning data. 3.23.
WARNING: WHEN THE OXYGEN LIMIT FRACTION INDICATES THAT THE MAXIMUM LIMIT IS REACHED, YOU MUST IMMEDIATELY TAKE ACTION TO REDUCE OXYGEN EXPOSURE. Failure to take action to reduce oxygen exposure after a CNS%/OTU warning is given can rapidly increase the risk of oxygen toxicity, injury, or death. 3.24 Tones Device tones can be turned on or off. When tones are off, there are no audible alarms. To set tones: 1. While in time mode, keep [DOWN] pressed. 2.
AC The AC is shown until the water contact deactivates. It is important to keep the water contact area clean. Contamination or dirt can prevent automatic activation/deactivation. See 4.1 Handling guidelines. NOTE: Moisture build-up around the water contact may cause the dive mode to activate. This can happen, for example, when washing your hands or sweating. To save battery power, deactivate the water contact by cleaning it and/or drying it with a soft towel.
4 CARE AND SUPPORT 4.1 Handling guidelines The Suunto Zoop Novo dive computer is a sophisticated precision instrument. Although it is designed to withstand the rigors of diving, you must treat it with the same proper care and caution as any other precision instrument. Handle the unit with care – do not knock or drop it. Do not fasten the strap of your dive computer too tightly. You should be able to insert your finger between the strap and your wrist.
Should moisture appear inside the case or battery compartment, immediately have the instrument checked by your Suunto service center. The optional scratch guard for Suunto Zoop Novo is designed to help prevent the display from getting scratched. Scratch guards can be purchased separately from your authorized Suunto dealer. Should you detect scratches, cracks or other such flaws on the display that may impair its durability, immediately contact your authorized Suunto dealer.
4.3 Changing strap to bungee Use the optional bungee adapter to change between wrist strap and bungee cord as needed. To install the bungee: 1. Turn the dive computer over. 2. Remove each strap by depressing one end of the spring bar with a small flat-head screwdriver or spring bar removal tool. 3. Attach the bungee adapters to each side of the case with the spring bars. Ensure the spring bars are firmly in position by pushing down on each end of the bar. 4.
5 REFERENCE 5.1 Technical specifications Dimensions and weight (with display shield) • • • • Length: 65.8 mm (2.6 in) Width: 65.8 mm (2.6 in) Height: 29.1 mm (1.1 in) Weight: 119.6 g (4.
• Accuracy: ± 2°C (± 3.6°F) within 20 minutes of temperature change Nitrox mode • • • • Oxygen: 21–50% Partial pressure of oxygen (pO2): 0.2 – 3.0 Oxygen Limit Factor: 0–200% with 1% resolution Gas mixtures: 1 Other displays • • • • • • Dive time: 0 to 999 min Surface time: 0 to 99 h 59 min Dive counter: 0 to 99 for repetitive dives No-decompression time: 0 to 99 min (-- after 99) Ascent time: 0 to 999 min (- - after 999) Ceiling depths: 3.
• Memory capacity: approximately 140 hours with 20-second recording interval and without transmitter data. In free dive mode, maximum capacity is 35 hours. Tissue calculation model • • Suunto RGBM Maximum depth of operation: 120 m (393 ft) 5.2 Compliance 5.2.1 CE Suunto Oy hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 5.2.2 EN 13319 EN 13319 is a European diving depth gauge standard.
Changes or modifications not expressly approved by Suunto could void your authority to operate this device under FCC regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
5.3 Trademark Suunto Zoop Novo, its logos, and other Suunto brand trademarks and made names are registered or unregistered trademarks of Suunto Oy. All rights are reserved. 5.4 Patent notice This product is protected by pending patent applications and their corresponding national rights: US 5,845,235, US 7,349,805, US 8,660,826. Additional patent applications may be filed. 5.
Exclusions and Limitations This Limited Warranty does not cover: 1. a) normal wear and tear such as scratches, abrasions, or alteration of the color and/or material of non-metallic straps, b) defects caused by rough handling, or c) defects or damage resulting from use contrary to intended or recommended use, improper care, negligence, and accidents such as dropping or crushing; 2. printed materials and packaging; 3.
Access to Suunto warranty service You must provide proof of purchase to access Suunto warranty service. For instructions how to obtain warranty service, visit www.suunto.com/warranty, contact your local authorized Suunto retailer, or call Suunto Contact Center. Limitation of Liability To the maximum extent permitted by applicable mandatory laws, this Limited Warranty is your sole and exclusive remedy and is in lieu of all other warranties, expressed or implied.
and/or otherwise communicated, disclosed or reproduced without the prior written consent of Suunto Oy. While we have taken great care to ensure that information contained in this documentation is both comprehensive and accurate, no warranty of accuracy is expressed or implied. This document content is subject to change at any time without notice. The latest version of this documentation can be downloaded at www.suunto.com. 5.
Term What it means CNS% Central nervous system toxicity limit fraction. Compartment See "Tissue group". DM5 Suunto DM5 with Movescount, a software for managing your dives. Time spent at a decompression stop, or range, Decompression before surfacing, to allow absorbed nitrogen to escape naturally from tissues. On a decompression stop dive, the depth range Decompression between the floor and the ceiling within which a range diver must stop for some time during ascent.
Term What it means Floor The deepest depth during a decompression stop dive at which decompression takes place. He% Helium percentage or helium fraction in the breathing gas. MOD Maximum operating depth of a breathing gas is the depth at which the partial pressure of oxygen (PO2) of the gas mix exceeds a safe limit.
Term What it means O2% Oxygen percentage or oxygen fraction in the breathing gas. Standard air has 21% oxygen. Limits the maximum depth to which the nitrox mixture can be safely used. The maximum partial Partial pressure pressure limit for enriched air diving is 1.4 bar (20 of oxygen (O2) psi). The contingency partial pressure limit is 1.6 bar (23 psi). Dives beyond this limit risk immediate oxygen toxicity.
Term What it means Trimix A breathing gas mix of helium, oxygen and nitrogen.
INDEX A Activation pre-checks, 14 Air mode, 33 Alarm, 17, 27 Altitude adjustment, 41 Apnea timer, 22 Ascent rate, 23 B Backlight, 25 Battery, 57 indicators, 16 Bookmarks, 25 Bungee, 58 C Calendar clock, 25 D Date, 26 decompression, 50, 52 Decompression Safety, 51 deepstop safety stop, 43 Depth alarm, 28 display, 11 Display contrast, 28 Dive history, 29 Dive modes, 32 Air, 33 Free, 36 Gauge, 35 Nitrox, 33 Dive numbering Plan, 38 Dive planning, 38 Dive time alarm, 39 E Error State Er, 40 F Free mode, 36
Glossary, 66 RGBM, 50 H S handling care, 56 high-altitude diving, 52 safety stop, 23 Sample rate, 46 save battery, 43 Set up, 13 software version, 47 Stopwatch, 47 Surface time, 48 I Icon, 11 L Logbook, 29 M Memory mode, 29 modes change modes, 11 Modes Dive, 32 N Nitrox mode, 33 No-fly time, 48 Notifications, 17 O Oxygen toxicity, 53 P Personal adjustment, 41 R 72 T Time, 26 Dual time, 27 Time mode, 25 Tones, 54 U units, 26 W Warnings, 17 Water contact AC symbol, 54
SUUNTO CUSTOMER SUPPORT 1. www.suunto.com/support www.suunto.com/mysuunto 2.
