User Manual
Table Of Contents
- 1. SAFETY
- 2. Getting started
- 3. Settings
- 3.1. Button and screen lock
- 3.2. Backlight
- 3.3. Tones and vibration
- 3.4. Bluetooth connectivity
- 3.5. Airplane mode
- 3.6. Do Not Disturb mode
- 3.7. Notifications
- 3.8. Time and date
- 3.9. Language and unit system
- 3.10. Watch faces
- 3.11. Power saving
- 3.12. Sunrise and sunset alarms
- 3.13. Position formats
- 3.14. Device info
- 4. Features
- 5. SuuntoPlus
- 5.1. SuuntoPlus: Climb - Hill training
- 5.2. SuuntoPlus: Ghost runner
- 5.3. SuuntoPlus: Loop - Lap Timer (Speed, Pace, Power)
- 5.4. SuuntoPlus: Safe – My location
- 5.5. SuuntoPlus: Sprint - Running Pace, Cycling Power
- 5.6. SuuntoPlus: Strava
- 5.7. SuuntoPlus: TrainingPeaks
- 5.8. SuuntoPlus: Wings for Life World Run
- 6. Valid for barometer version only
- 7. SuuntoPlus (Baro)
- 8. Care and support
- 9. Reference
4.2. Logbook
You can access the logbook by swiping down or pressing the upper button until you see the
logbook icon..
Tap on the log entry you want to view and scroll through the log by swiping up or down or by
pressing the upper right or lower right buttons.
NOTE: The log entry remains gray until it has been synced with your online account.
To exit the log, swipe right or keep the middle button pressed. You can also just double-tap on
the screen to return to the watch face.
4.3. Navigation
4.3.1. Bearing navigation
Bearing navigation is a feature that you can use outdoors to follow the target path for a
location you see or have looked at from map ahead. You can use this feature stand alone as a
compass or together with a paper map.
If you set the target distance and altitude while setting the direction, your watch can be used
to navigate to that target location.
To use bearing navigation during an exercise (only available for outdoor activities):
1. Before you start an exercise recording, swipe up or press the lower button to open the
sport mode options.
2. Tap Navigation or press the middle button.
3. Select Bearing
4. If needed, calibrate the compass by following the on-screen instructions.
5. Point the blue arrow on the screen towards your target location and press the middle
button.
6. If you do not know the distance and altitude to the location, select No
7. Press the middle button to acknowledge the set bearing and go back to the sport mode
options.
8. If you know the distance and altitude to the location, select Yes
Suunto 9
25