User Manual
Table Of Contents
- 1. Intended use
- 2. SAFETY
- 3. Getting started
- 4. Settings
- 4.1. Button lock and screen dimming
- 4.2. Backlight
- 4.3. Tones and vibration
- 4.4. Bluetooth connectivity
- 4.5. Airplane mode
- 4.6. Do Not Disturb mode
- 4.7. Notifications
- 4.8. Time and date
- 4.9. Language and unit system
- 4.10. Watch faces
- 4.11. Sunrise and sunset alarms
- 4.12. Power saving
- 4.13. Position formats
- 4.14. Device info
- 5. Features
- 5.1. Recording an exercise
- 5.2. Media controls
- 5.3. Logbook
- 5.4. Navigation
- 5.5. Daily activity
- 5.6. Training insight
- 5.7. Adaptive training guidance
- 5.8. Recovery
- 5.9. Sleep tracking
- 5.10. Stress and recovery
- 5.11. Fitness level
- 5.12. Chest heart rate sensor
- 5.13. Pairing PODs and sensors
- 5.14. Timers
- 5.15. Intensity zones
- 5.16. FusedSpeed
- 6. SuuntoPlus™
- 7. Care and support
- 8. Reference
4.4. Bluetooth connectivity
Suunto 5 Peak uses Bluetooth technology to send and receive information from your mobile
device when you have paired your watch with the Suunto app. Same technology is also used
when pairing PODs and sensors.
However, if you do not want your watch to be visible for Bluetooth scanners, you can activate
or deactivate the discovery setting from the settings under Connectivity » Discovery.
The Bluetooth can also be completely turned o by activating airplane mode, see 4.5.
Airplane mode
4.5. Airplane mode
Activate airplane mode when needed to turn o wireless transmissions. You can activate or
deactivate airplane mode from the settings under Connectivity.
NOTE: To pair anything with your device, you need to first turn o airplane mode if you
have it on.
4.6. Do Not Disturb mode
The Do Not Disturb mode is a setting that mutes all sounds and vibrations and dims the
screen, making it a very useful option when wearing the watch in, for example, a theater or
any environment where you want the watch to operate as usual, but silently.
To turn on the Do Not Disturb mode:
1. From the watch face, keep the middle button pressed to open the shortcuts menu.
2. Press the middle button to activate Do Not Disturb mode.
If you have an alarm set, it sounds as normal and disables Do Not Disturb mode unless you
snooze the alarm.
4.7.
Notifications
If you have paired your watch with the Suunto app and using an Android phone, you can
recieve notifications of incoming calls and text messages, for example, on your watch.
When you pair your watch with the app, notifications are on by default. You can turn them o
from the settings under Notifications.
NOTE: Messages recieved from some apps used for communication might not be
compatible with Suunto 5 Peak.
Suunto 5 Peak
12