User Manual

You can navigate to any POI that is in your watch POI list.
NOTE: When navigating to a POI, your watch uses full power GPS.
To navigate to a POI:
1. Press the upper right button to open the launcher.
2. Scroll to Navigation and press the middle button.
3. Scroll to POIs and press the middle button to open your list of POIs.
4. Scroll to the POI you want to navigate to and press the middle button.
5. Press the upper button to start navigating.
To stop navigating, press the upper button again at any time.
While you are moving, the POI navigation has two views:
•
POI view with direction indicator and distance to the POI
•
map view showing your current location relative to the POI and your breadcrumb trail (the
track you have traveled)
Press the middle button to switch between views. If you stop moving, the watch cannot
determine which direction you are going based on GPS.
TIP: While in the POI view, tap on the screen to see additional information in the lower
row such as altitude dierence between current position and POI and estimated time of
arrival (ETA) or en route (ETE).
In the map view, other POIs nearby are shown in gray. Press the upper left button to switch
between the overview map and a more detailed view. In the detailed view, you adjust the
zoom level by pressing the middle button and then zooming in and out with the upper and
lower buttons.
While navigating, press the lower right button to open a list of shortcuts. The shortcuts give
you quick access to POI details and actions such as saving your current location or selecting
another POI to navigate to, as well as ending navigation.
5.4.6.2. POI types
The following POI types are available in Suunto 5 Peak:
generic point of interest
Bedding (animal, for hunting)
Suunto 5 Peak
29