User Manual

Set your activity specific power zones from the settings under Training » Intensity zones »
Advanced zones.
1. Select the activity (Running or Cycling) that you want to edit or press the middle button
when the activity is highlighted.
2. Press the lower right button and select power zones.
3. Press the upper right or lower right buttons and select the power zone you want to edit.
4. Select your new power zone by pressing the upper or lower buttons.
5. Press the middle button to select the new power value.
6. Press and hold the middle button to exit the power zones view.
5.15.3.1. Using power zones when exercising
You need to have a power pod paired with your watch to be able to use power zones when
exercising, see 5.13. Pairing PODs and sensors.
When you record an exercise (see 5.1. Recording an exercise), and have selected power as an
intensity target (see 5.1.2. Using targets when exercising) a power zone gauge, divided into
five sections, is viewed. These five sections are shown around the outer edge of the sport
mode display. The gauge indicates the power zone you have chosen as an intensity target by
lighting up the corresponding section. The small arrow in the gauge indicates where you are
within the zone range.
Your watch alerts you when you hit your selected target zone. During your exercise the watch
will prompt you to speed up or slow down, if your power is outside the selected target zone.
In the exercise summary, you get a breakdown of how much time you have spent in each
zone.
5.16. FusedSpeed
FusedSpeedTM is a unique combination of GPS and wrist acceleration sensor readings for
measuring your running speed more accurately. The GPS signal is adaptively filtered based
on wrist acceleration, giving more accurate readings at steady running speeds and a quicker
responses to changes in speed.
Suunto 5 Peak
48