User's Guide

Product Introduction
UMI E-Motor is a type of electric propeller installed on the paddle board, kayak or other water sports products.
UMI E-Motor works with a dedicated radio controller. User can control its RUN/STOP and speed on the paddle
board or kayak by radio controller.
Product Description
1. UMI E-Motor Body
[1] propulsion parts
[2] connector buckle
[3] male connector
[4] female connector
[5] bolt
[6] battery
Steps for installation
1）Insert male connector [3] of propulsion power parts [1] into female connector [4].
2）Rotate connector buckle [2] and tighten it until it cannot be rotated.
3）Insert the handle on the battery [6] into the installation seat of paddle board or kayak, and then insert the
bolt [5] to fix it. The installation is completed.
4）Use the radio controller to operate the propeller.
How to charge for battery