User's Guide

Connect the propeller battery to the charger via the charger adapter, then plug the charger into the
power socket(220V) and charge it for about 1h and 30min. When the charger indicator turns green, the
charging is completed.
2. Radio controller
[1] speed-up button
[2] speed-down button
[3] STOP
[4] indicators for body power and speed
[5] charging indicator
[6] pairing indicator
[7] ON/OFF button of controller
[8] indicators for controller power
How to use radio controller
1) The original radio controller had been pre-paired with the body already. Press ON/OFF button of
controller [7]. When the power indicators of the remote control [8] and indicators for body battery power
[4] are on, that indicators the radio controller is power-on and the communication with the body is ready.
2) There are 7 gears of the speed of propeller, and the first gear means no power. The speed can be
adjusted by press speed-up [1] and speed-down [2]. When all three Indicator lights [4] are on, it indicates
the sixth or seventh gear
3) When the power of the body is enough, the indicator lights [4] would be blue; when the indicator lights
turn red, it indicates that the power of the body is insufficient. Please stop using it and charge it in time.
4) When the radio controller needs to be replaced, the new one shall be paired with the propeller. The
pairing operation is as follows:
charger adapter