User's Manual

18

After the ESC emits three short, high pitched sounds, do a self-check and wait for the drone
to broadcast a ready to operate notice.

Plan routes, set parameters, and upload the information into the piloting program. Always
ensure that there is no one within 10 meters when the drone takes off.
7. Land

After the task is complete, the drone App will make a request to land, confirm the request
to initiate landing procedures. After a successful landing, the drone will deploy a “successful
landing notice”.

After the propellers have stopped, unplug the main battery.

Turn off the remote controller.

Put away the propellers and fold the arms securely.

The backup battery will automatically turn off in after 10 minutes.
8. Transport the aircraft

When transporting the aircraft to and from destinations, the arms and propellers should be
stowed away securely.

The vision sensors and cameras onboard the aircraft should be kept away from hard surfaces
and kept secured at all times.

Prevent the drone from shifting back and forth during bumpy and uneven journeys .

Note: We forbid lifting the protective front cover plate of the aircraft.
9. Pesticide Handling

The safety instructions provided by the pesticide manufacturer should be followed when handling
pesticides.

In order to ensure operational safety and peak performances, users should stay up to date on
maintenance requirements.
Maintenance instructions
1) Every 5-10 operations
 Check whether the nozzle and/or pipes are blocked. Clean the filters if necessary.
 Check whether the propeller screws are loose.
 Check whether the drone arms are fully secured to the mainframe.
2) Every day
 Clean the liquid container, nozzles, all the pipes, and wipe down the protective casing, arms
and propellers.
 Wipe down the camera lenses, distance sensor, height sensor.
3) Weekly
 Tighten the propeller screws, camera mounts, and motor screws accordingly.
 Check the carbon fibre casing of the drone and replace parts if any cracks are found.
4) Monthly
 Check whether the height sensor and distance sensor are connected and securely mounted to the
drone.
 Check the entire drone for damage (look for wear and tear).
 Check whether any part of the ESC is loose or corroded.