User's Manual

Document No.:
6 / 91
manufacturer must be used.
Warning: When charging the battery when it is in the instrument, the
power supply of the instrument shall be disconnected, therefore, the
instrument cannot be used during battery charging.
1.7 Statement of the manufacturer
Responsibility of the manufacturer
Suzhou PeakSonic Medical Technology Co.Ltd. only considers itself responsible for the
safety, reliability and performance of the instrument in case of the following circumstances,
namely:
The assembly operation, expansion, re-adjustment, improvement and repair are carried
out by personnel approved by Suzhou PeakSonic Medical Technology Co.Ltd.;
Relevant electrical equipment complies with national standards;
The instrument is used according to operation guidance.
In case of the following circumstances, Suzhou PeakSonic Medical Technology Co.Ltd. is not
responsible for the safety, reliability and operation of the product:
 The components are disassembled, stretched and re-debugged;
 The product is not correctly used according to the Operating Specification.
Warning: Without the permit of the manufacturer, the equipment shall
not be modified.
Warning: If the equipment is modified, corresponding inspection and
tests must be carried out in the department designated by the state to
ensure that the equipment can be used continuously and safely.