User's Manual

Document No.:
39 / 91
bladder scanning treatment under the expert mode.
6.4 View ultrasound image of bladder scanning or section
diagram, projection and 3D image
After the bladder scanning, it will automatically jump to the main scanning end interface:
The main interface after the scanning under the expert mode (Figure 5-5-3); The main
interface after the scanning under the easy mode (Figure 5-6-3); The main interface after
the scanning under the intelligence mode (Figure 5-7-3); The first scanned image (or the
section area) and the current bladder volume image are displayed in the image display area
of the main interface. And 12 scanned images +3D images are displayed at the bottom of
the screen. The operator can place a finger at the bottom of the screen for displaying 12
scanned images + 3D images, and slide to left and right to view 12 bladder ultrasound
images (12 section areas of the scanned bladder) and 3D images respectively. The image
scanning projection is displayed in the round frame with a cross in the right middle of the
main interface. Click the scanning projection in the round frame to view the 3D images of
the bladder (Figures 5-8, 5-9 and 5-10) or click the 3D images of the bladder to view the
projection image. The scanning projection interface diagram is shown in the scanning end
interface.
When selecting the expert mode or the easy mode, make the projection of the bladder
as close to the center of the cross as possible, and ensure that all projection areas are
connected to the cross, so as to ensure that the bladder is in the scanning area. When the
projection is displayed in green, it means that the bladder is in the scanning area; otherwise,
it is in orange.
6.5 Patient information input
On the main interface (Figure 5-2 or Figure 5-3 or Figure 5-4), click the input fields of ID,
AGE and NAME to enter corresponding information. Enter the patient ID in the ID input field;
Enter the patient age in the AGE input field; Enter the patient name in the Name input field.