User's Manual

Document No.:
63 / 91
Chapter VIII Transportation and Storage
8.1 Precautions for handling instrument
(1) Place the instrument in corresponding place of the packaging box, strictly prevent
falling, vibration and collision of the probe or the instrument.
(2) After the packaging box is covered, it can be transported.
Tighten the bottle cap of ultrasonic coupling agent to prevent the gel from flowing out
and put it in corresponding place of the packaging box.
8.2 Requirements for transportation and storage environment
Ambient temperature range: -40℃～+55℃
Relative humidity range: 10%～80%
Atmospheric pressure range: 50kpa～106kpa
8.3 Transportation
The marks on the packaging boxes of the instrument shall meet the requirements of
GB/T191-200 Packaging — Pictorial marking for handling of goods. The packaging boxes
of the instrument are equipped with simple shakeproof facilities, suitable for air, railway,
road and ship transportation. Avoid rain and snow splashing, inversion and collision.
8.4 Storage
When the storage period of the instrument is more than 6 months, the instrument shall
be taken out of the packaging box, charged for 4 hours, and then be put into the box
according to the direction shown on the package and placed in the warehouse. Do not
stack the instrument up, or place it against the floor, walls and roof.