User's Manual

Document No.:
1 / 90
Chapter IV Installation
4.1 Unpacking & Initial Inspection
Open the box and inspect whether there is any transportation damage. Verify according to the "packing
list" and ensure you have received all appropriate components. Install according to the requirements and
methods specified in “4.2".
4.2 Installation and Disassemble
• Check the power supply of the power adapter. After confirming that it is within the specified power sup-
ply range, insert the AC input plug of the power adapter into the power supply socket.
• Connect the host machine with the carter: place the host on the main frame of the carter.
Installation steps: (Figure 4-1)
Step 1. Align the four holes of the back of the host machine with the four holes on the frame of the carter
Step 2. Tighten the four screws with a screwdriver
Step 3. Successfully connect the console with the rolling medical cart