User's Manual

Document No.:
2 / 90
Figure 4-1 M5 connection between cart frame and the console
• Connect the probe with the host machine: align the red dot on probe with the red dot on the side of the
host. Plug in the probe (shown as figure 4-2)
Figure 4-2 M5 Connect the probe with the console
Install and remove the battery: please follow the steps below (as shown in figure 4-3)
Install the battery:
Step 1. Slide the battery door ① according to the arrow direction.
Step 2. Push up and insert the battery ② according to the arrow direction.
Remove the battery:
Step 1. Slide the battery door ① according to the arrow direction.
Step 2. ③Take out the battery according to the arrow direction.