User's Manual

Document No.:
7 / 90
6.4.2.3 Intelligence Mode
During scan twelve B-Mode bladder images are displayed on the right side of the screen. Serial number of
the images increases from 01 to 12. When it appears as 12/12, it means scan, image analysis and volume
calculation is completed.
Under gallery view, bladder volume and 3D bladder projection appears on the left side of the screen. By
default the first image is enlarged and shown on the up right part of the screen and above the twelve
images displayed on the bottom right side by side. Slide left or right to view all twelves images. Tap on any
of them, an enlarged image appears.
Under grid view, bladder volume and 3D bladder projection appears on the left side of the screen as same
as the gallery view. In the image display zone on the right side of the screen four images will be displayed
which are 01 and 07 above and 02 and 08 below. Every two images are displayed orthogonally. Press ＞
to display the combination of 03 and 09 on top and 04 and 10 on the bottom. Press > again to display the
combination of 05 and 11 on top and 06 and 12 on the bottom. Press < to display the orthogonal combina-
tion which is opposite to the previous ones.
Gallery view is the view by default. Scan interface of the expert mode as shown in Figure 5-13. Gallery
view after scan completion as shown in Figure 5-14 and grid view after scan completion as shown in
Figure 5-15.
Remark: if the bladder volume is measured a couple of times for one patient at once, only the highest
value will be shown.
Under all three operation modes, the brightness of the screen could be adjusted by putting the figure next
to the projection image and moving it upside down on the touch screen.
6.5 Check Bladder Volume Ultrasonic Images, Sections,
Projections or 3D Images
The system returns to scan complete interface once scan is accomplished. For expert mode, the scan
complete interface as shown in Figure 5-6. For easy mode, the scan complete interface as shown in
Figure 5-10 or Figure 5-11. For intelligence mode, the interface as shown in Figure 5-14 or Figure 5-15.
Once gallery view is chosen, bladder volume and 3D bladder projection appears on the left side of the
screen. By default the first image is enlarged and shown on the up right part of the screen and above the