User's Manual

Document No.:
17 / 90
modify administrator password are being managed.
Enter new passwords to access patient history information, export patient history information and modify
administrator password and press to save the new entries. Slide the button next to “Memorize
history” to the right, it turns to green. Login password to access patient history data is saved and users do
not need to enter the password again in the future operation. It is the same for “Memorize upload”. Slide
the button to the right to turn it on. Users do not need to reenter the password in the future operation.
On the management interface, enter hospital name and department, press to save the new
entries and press to return to the main page.
On the interface (Figure 5-39), enter password “21650” to reset all passwords. All saved passwords return
to the initial ones.
6.9.11 General Information
In the setting menu general information of the device could be found including hardware version number
M5.V1.0.0.X, software version M5_V1.0.0.1 and company name Suzhou PeakSonic Medical Technology
Co.Ltd.
6.10 Screen of the Probe
Once the device is switched on, company logo appears on the screen of the probe (Figure 5-41-1).
Under expert and easy mode, logo keeps showing on the small screen during pre-scan and scan. After
scan is completed, users could see bladder volume value and bladder projection on the screen. If the
result appears as Figure 5-41-2, it means the bladder position was incorrect. Bladder projection image
and volume value cannot be displayed. If the result is shown as Figure 5-41-3, it indicates the scan was
successful. Users could see the results including bladder volume and projection image.
Under intelligence mode, during pre-scan the screen looks as Figure 5-41-4. Users could directly see
bladder projection image. If the real time projection is off the centre, users would see indication arrows as
（←↑→↓↖↗↘↙）which guide the probe to move to the right direction. Follow the arrow till the projection
reaches the centre, then press SCAN. Result display interface is as same as that from expert and easy
modes.