User's Manual

Document No.:
29 of 90
Chapter IX Troubleshooting
9.1 Inspection
● Check whether power supply is normal, whether the cable is connected with the console and has
plugged into the power socket.
● Check whether the probe and the console has been correctly connected.
9.2 Troubleshooting
Serial
No.
Issue
Troubleshooting
1
After pressing the power button,
power indicator is not on and no
image displayed on the screen.
1. Inspect whether the battery is installed and
charged
2. Inspect power supply
3. Inspect power cable and plug
4. Inspect whether the adapter is normal
2
reticular interference or snow-
flake interference on the display
screen during scan
1. Inspect the power supply and check
whether it is interfered by other devices
2. Check whether electric and magnetic fields
in the surrounding space
3. Check whether power plug and socket
works properly
9.3 After-sales Service
If the issue cannot be solved, please contact us at [e-mail]
9.4 Device Reparation
The maintenance of the instrument shall be carried out in the places appointed by the manufacturer. Dur-
ing the maintenance, in case any maintenance documents are needed please contact the manufacturer