User's Manual

INSTALL MANUAL
Page 7 of 7
3）Setting Pressure Unit
Press ENTR key and hold it 3 seconds long, then release it. picture like down will
be shown, digit 1 will flash, at this time adjust the digit to 2 by ↑ 、 ↓ , then
press ENTR 。
At this time enter the step as below. You can press ↑ 、 ↓ key to choose one
from two alternation pressure unite in Psi (abbr. P) and bar (abbr. b)，then press
ENTR to exit 。
4）Setting PLC type
Press ENTR key for more than 3 seconds, picture like down will be shown, digit
1 will flash, at this time adjust the code of function you require by ↑ 、
↓ ,then press ENTR 。
Then come into the picture shown down, select the code of PLC required by ↑ 、
↓ ,then press ENTR 。
Index Index Type of PLC PLC Model
1 0 PC
2 1 Anchun PLC- CP370
3 2 Fiji PLC（not support currently）