add Li mail SET TREE, Full-Time Consciously Tine Press Monitoring Ester SAT TOMS includes MASTER snd Sensors The SENSOR Integrated with the fire valve located inside sate tire fo collect pressure and imprimaturs data of the tre all the ime The Senors transmit the data to the MATER, The MASTER receives and processes the date , shows the information on the screen, and sounds the alarm if any informal condition recurred which is based on the chatting pressure. Ago! SET TPS MASTER Screen Re-St Key Switch key ..
S51 LPNS =e Diplopia of SET REMS Tyre 2 pe Temperature Unit JT {Right Front Tire) (ene SENSOR Trouble Alert Icon {Sett Front Tire} [High Temperature Alar Leon Tired . Bar BE | {Lo Back Tire} To.
DEE RT he aE Operation Steps: 1. Take one SENSOR, insert the haunt connector to connect the right two contacts in the hole to start the initialization. Crass the E key for more then 2 seconds to access the initialization interface ,as shown on the left. Press the E key to frescoes the initialization interface for the tiara 1, sa shown on the loft.
installation and Initialization of SAY TENS Tha screen shows 'S* when the Initialization la success. Remove the shunt connector the beep buzzes, and the display shows Low-Pr assure Level 3 Alar, Affix the position label @ to the initialized SENSOR. 8. Once the initialization fails, the screen shows.’ as shown on the left. —in this sacs, you ends re-initialize the SENSOR from tape 1, 7. Sat the other SENSORS following the step 1-8 and affix the position labels @, @ and & to them correspondingly.
a EE aE Full-Time Mainspring Function: The S&T TOMS oan work all the time, dither parking or sunning. High Pressure Alert § oon A Function: The High Pressure Alert is initiated when the air pressure within a tire exceeds the suiting pressure by 25%, Alert Mode: The satsuma light, High Pressure Warning icon and the audible alarm turn on together. Treatment: Press the § key to acknowledge and stop the audible alarm. The alarm light remains on and the display reverts to a normal mode.
Are ES ag ea Low Pressure Love 2 Alert Bg or 18 See Function: The Low Pressures Love 2 Alert is initiated when the air pressure within a tire drops below the selling pressure by 26%. Alert Mode: The alarm Eight, Low Pressure Level 2 Alert loon and the audible alarm turn on thee. Treatment: Press the 8 key to acknowledge and stop the audible alarm, The alarm Thy remains on and the display reverts to 2 normal mode, When the tre pressure reaches the standard pressure the alarm fight turns off automatically.
Function and Operation of SET TOMS ae High Temperature Mort § BD Function: Tha High Temperature Alert Is Initiated when the alr temperature within a tire exceeds 75. Lori Mode: The alarm Host, High Temperature Alert Icon and the audible alarm turn on together, Treatment: Press the 8 key fo acknowledge snd stop the audible alarm. ‘The alarm light remains on and the spiry reverts io a normal mode. When the tire temperature cools blow TEC the alarm light turns off automatically. Quick Leaking Aad rer Be.
a =e Operation Shes: 4, Prose tha E kay for more than 2 seconds to access the i Operation Interface 1, as shown on the laf. 2. Cross the § key to access the Operation Interface 2. Press the E key to access the Led Record Inquiry Interface. 0 Shown in the middle of the screen indicates that It Is the latest alert record. Frogs the E key to check the pressure an the record. The screen shows the High Pressure Alert for the tire 1, the pressure of tire 1 while the alarm happened is 2.70Bar.
lL ed CE Stony Tie Engulf Function : The clock bully In the system has bean sot . The system clock provides teems evidence for the alert record, The user can Inquire the current date rnd time through the function mime. Operation Steps of the Sybarite 10 Penguin Engineering: Press the E key for more than 2 seconds (0 cutlass the Interface as shown on the left, Prose the 8 kay twice to switch the interface number to 3.
Function And Operation of SBTTPMS = aE Blanchard Pressure Inquiry Function : The Initialized standard surpass in the system for each tre can be inquired . Operation Bleep: 1. Prang the E key for moral than 2 seconds to access the interface as shown in the figure, Pres the § key to access the interface 5. 3 Press the E key to access the Standard Pressure Inquiry interface for the left front tire (tire 1). Pres the E key again to display the standard pressure of the tire 1.
a TT WH Especial Belling For Standard Pressure Function: The B&T TOMS can be setting different standard pressure according to vehicle pacify, tire type and tire position Therefore the standard and data which initiate the alarming are more reasonable. Sensor Trouble Alert FF Display: Boe HH Function : When one of the SENSORS falls to work the SENSOR Trouble Alert will be initiated.
Ce ral 1. The sateen shows clobbers or nothing: Press the Re-Set Kay on the back of ths MASTER, the system will re-start automatically If the system still fail to work, please contact Sate Auto Electronic 2. The rad slot lamp Heights without beep alarming: Once alert happens , The audible alarm can last for 100 seconds. If the user does not press the § Key to stop it, it will stop automatically after 100 seconds. 3.
Le =a Valid Warranty Card 1. Tha Warranty Card must be filled completely, signal by the user and sealed by the authorized distributor of Sate. 2. The Warranty Card is valid in the country or region where the purchase courses. 3. The Warranty service requires presentation of both the Warranty Card and the original formal invoice. Warranty Condition, Responsibility and Limitation 1. The Product warranty period is one year and subject to the time marked on the novice . 2.
sel Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user's authority to operate the equipment. Any change to the equipment will void FCC grant, NOTE; This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits ure designed to provide reasonable protection against harmful interference in a residential installation.
