User's Manual

Table Of Contents



TPMS Sensor Installation Instruction

1. General Description

Tire pressure sensor is composed of RF chip, battery, antenna and Rf

matching network. It is applied to monitor tire pressure, temperature and

acceleration and the tire data is transmitted via center frequency 433.92MHz.

2. Operation Functions

Transmitter ID Programming:transmitter ID can be progranmmed for easy

replacement

Alarm Record Inquity:automatically record the 10 alarm records

Standard Pressure Programming: standard pressure for each tire can be

programmed on monitor

3. Product Features

Powerful functions including low pressure alarms in 3 levels,fast leak alarm

and standard pressure setting etc.

Monitor connects to continuous power to ensure full-time monitoring

Design of the whole system matches the rtuck perfectly

Simple operation for function programming and inquiry

4. Installing structure

5. Installation requirements

valve

cap

nut

cushion

Valve

rod

TPMS

Sensor

PAGE 1
 TPMS Sensor Installation Instruction 1. General Description Tire pressure sensor is composed of RF chip, battery, antenna and Rf matching network. It is applied to monitor tire pressure, temperature and acceleration and the tire data is transmitted via center frequency 433.92MHz. 2.
PAGE 2
 TPMS Sensor Installation Instruction moment:3.8N.m(±0.3N) Tires must do dynamic balance testing and adjusting.
PAGE 3
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.