User's Manual

to confirm whether the transmitter is firmly screwed onto the valve or
not, check whether there is air leakage caused by the installation or the
seal of the Transmitters or not.
5. Once screwed onto the tire, transmitter can sense the pressure inside
the tire and transmit the data to the monitor, and the information will
appear on the screen within 6 minutes.
Note: 1. Please set the standards pressure of each tire on monitor before
install the transmitter. The standard pressure has been set
to100PSI in factory.
2. If one of your transmitters is broken or lost, the user only needs to
replace it, others will work as normal.
Programming of Transmitter ID
When the Monitor is powered for the first time, the screen shows
“NSP”, which means there is no transmitter programmed into it. If the
user wants to program a new transmitter into the Monitor, the operation