User's Manual

LCD KVM Console User Manual
57
Chapter 2
Hardware Installation
Stacking and Installation Precautions
1. Important safety information regarding the placement of the LCD KVM switch is
listed in the appendix, please refer to it before proceeding.
2. Before installation, please make sure that all the devices connected to the power supply are
turned off. You must unplug all the power cord of the computer with keyboard power on
3. LCD KVM switch packing stuffed with stuffing in the process of delivery to protect the product.
Attach the protective film and filler to the LCD module and remove the filler before mounting.
The LCD KVM switch can be placed in any suitable plane and is sufficient to securely support the weight
of the equipment plus additional cables; Please make sure that the plane is clean and free from other debris
that can affect the ventilation and normal operation of the switch.
Standard Rack Mounting
1. Remove the mounting brackets and fasten the front bezel to the frame with screws. Slide the back plate
with the rear flange toward the rack until the flange is against the chassis, and then use the screws to secure
the rear flange to the chassis.