User's Manual

LCD KVM Console User Manual
57
Chapter3
Basic Operation
Hot Plug
The KVM switch supports hot-plug, removing and removing components by unplugging the cables
connected to the computer's port without shutting down the switch. To make the hot swap function work
properly, follow these steps:
Hot – Plug Computer Connection
In order for OSD Menu to correspond to the KVM connection port changes, you must reset OSD Menu to
display the latest connection port information, OSD menu settings. Please refer to the OSD Menu section for
more information about functions and usage.
Note: If your computer's operating system does not support hot-plug functionality, this feature may not
function properly.
Hot – Plug Console Port
This product also provides keyboard, mouse and display hot-plug function. This product provides keyboard
and mouse port for two interface types. Users can select the corresponding device connection type according
to their usage and carry out corresponding control operation.
Note: If you access the USB and PS2 keyboard, mouse device, you do not have to use two types of devices,
otherwise, may cause the accused computer equipment mouse and keyboard response exception.
Connection Port Selection
The KVM switch can be used to quickly switch to any computer connected to the KVM in three modes:
manual key selection, OSD Menu screen selection, and hotkey selection.
Switch the Selection Manually
Use the buttons on the front control panel to select a
port.