User's Manual

LCD KVM Console User Manual
57
UNLOCK
AUTO LOCK
 The screen will automatically pull out the slide after the brake lock device to prevent the random sliding
LCD screen components to bring the instability and may cause damage to the user collision. After the
brake lock is activated, the LCD screen will limit the operation of pushing the slide rail. If you want to
do the push-in operation of the LCD module, the unlocking action must be done first, and the unlocking
switch is on both sides of the slide rail. (Please refer to the figure above for the specific operation). After
unlocking, the LCD assembly can be pushed into the slide rail.
Note
：
1.Push the LCD assembly into the slide, the unlock action and push action should be
careful, improper operation may clip your finger.
2.When using the keyboard or mouse, do not use the body to depress the LCD module
Otherwise, it may cause the slide rail to deform or not be able to be pushed into
the slide rail