User's Manual

LCD KVM Console User Manual
57
Chapter4
OSD Operation
OSD Introduction
OSD (On Screen Display), provides a menu driven interface to handle the computer switching procedure to
provide instant access to any computer on the installation.
OSD Log in
The OSD function provides a two-level (administrator / user) password mechanism. The factory default
setting is no need to login password authentication, so you are the first time to open the OSD main menu, no
need to enter the login password to enter the OSD main menu screen for the corresponding operation. If you
want to add this function, you can enter the OSD menu, in
【
F6
】
"SET" option to set the login password is
set successfully, the subsequent login requires the correct administrator / user password to enter the OSD
menu Interface operation. When you enter the setting options, some functions may need to be edited and
modified by the administrator. The default administrator password is admin. You can also modify and
change them as needed.
OSD Hot-Key
By default, you can type the [CTRL] key twice to have the OSD menu appear on the screen of the controlled
display and see the connection information and status information about the connected computers on the
KVM switch.
Note: You can change the keyboard hotkey on the OSD menu according to your needs. This product
provides 4 sets of optional OSD menu hotkey combinations. You can select the operation according to your
needs. (Please refer to the OSD menu for detailed description. )