User's Manual

LCD KVM Console User Manual
57
a port name; or make OSD setting adjustments.
To activate the OSD function key:
1. Press any function key
【
F1
】
---
【
F6
】
at the bottom of main screen to input the function key.
2. On the sub-menu, move the selection column to the option, and then press the {Enter} key.
3. Press the
【
Esc
】
key to return to the previous menu.
F1 GOTO：
Press the 【F1】 key to start the GOTO function. The GOTO function allows you to switch directly to the
connection port by typing the port name or its port number.
1. To use “NAM” method, move highlight bar to “NAME”, press 【Enter】, input name of a port, then press
[Enter] to confirm.
2. To use PN method, move highlight bar to “PN”, press 【Enter】, input port number, then press 【Enter】
to switch. If the port number is invalid, it will remind the user to input again.
Note:1. When keying name, if there is a matching name, the matched name will appear on the screen, just
press [Enter] to switch to that port.
2.In the "PN" port input box, only allow the input of numbers, such as the input of other characters are
regarded as invalid input, and can hear the equipment issued by the warning tone.
To return to main menu, press [Esc].
F2 SCAN：
The "SCAN" function allows you to perform automatic port scanning of the connected computers. Users can
switch ports in order to view the corresponding port computer status.
 The SCAN function can automatically scan from current selected port, the scan interval can be set by
users.
 When scanning, a small window on the screen indicates the current port number.