User's Manual

LCD KVM Console User Manual
57
CLEAR THE NAME LIST
This function clears the name of a port in the OSD menu. If you use this function, all the port names
will be emptied, so please do it carefully. When doing this, you need to verify the password of the
administrator, input 【Y】key, then press【Enter】 to confirm the operation. To cancel this operation,
input【N】key, and then press【Enter】to confirm the cancel operation, or keyboard input 【Esc】 directly
back.
RESTORE DEFAULT VALUE
Restore settings to default value. This setting will make all the OSD menu options to restore the initial
settings, so please be careful to do this. When doing this, you need to verify the password of the
administrator, input 【Y】key, then press【Enter】 to confirm the operation. To cancel this operation,
input【N】key, and then press【Enter】to confirm the cancel operation, or keyboard input 【Esc】 directly
back.
LOCK CONSOLE
You cannot switch or scan after you lock the console (including switch by push button on the panel or
OSD). You need to enter password to set.
Note: After Locking the console, you can also unlock the console by this option. It also needs password
verification.
（ Descriptions of the OSD Menu functions may vary. Refer to the description of each interface
KVM switch manual for details.）